Ad Blocker Detectado
Nuestro sitio web es posible al mostrar anuncios en línea a nuestros visitantes. Por favor considere apoyarnos deshabilitando su bloqueador de anuncios.
Límite de tiempo: 0
SUmario del cuestionario
0 de 55 preguntas completado
Preguntas:
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 11
- 12
- 13
- 14
- 15
- 16
- 17
- 18
- 19
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 46
- 47
- 48
- 49
- 50
- 51
- 52
- 53
- 54
- 55
Información
CCNA 2 Final Exam (v5.03)
Ya has realizado este cuestionario antes. Por tanto, no puedes empezarlo otra vez.
Cargando el cuestionario...
Debes ser un usuario registrado para poder realizar el cuestionario.
Tienes que terminar antes el siguiente cuestionario, para iniciar este cuestionario:
Resultados
0 de 55 preguntas contestadas correctamente
Tu tiempo:
El tiempo se ha terminado
Has conseguido 0 de 0 puntos posibles (0)
| Puntuación de promedio: |
|
| Tu puntuación |
|
Categorías
- No asignada a ninguna categoría 0%
Tus resultado se han guardado en el ránking
![captcha]()
Cargando
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 11
- 12
- 13
- 14
- 15
- 16
- 17
- 18
- 19
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 46
- 47
- 48
- 49
- 50
- 51
- 52
- 53
- 54
- 55
- Contestada
- Revisada
-
Pregunta 1 de 55
1. Pregunta
1. Refer to the exhibit. A network administrator is configuring a router as a DHCPv6 server. The administrator issues a show ipv6 dhcp pool command to verify the configuration. Which statement explains the reason that the number of active clients is 0?
Correcto
Incorrecto
-
Pregunta 2 de 55
2. Pregunta
2. Which command, when issued in the interface configuration mode of a router, enables the interface to acquire an IPv4 address automatically from an ISP, when that link to the ISP is enabled?
Correcto
Incorrecto
-
Pregunta 3 de 55
3. Pregunta
3. Which kind of message is sent by a DHCP client when its IP address lease has expired?
Correcto
Incorrecto
-
Pregunta 4 de 55
4. Pregunta
4. Refer to the exhibit. R1 has been configured as shown. However, PC1 is not able to receive an IPv4 address. What is the problem?
Correcto
Incorrecto
-
Pregunta 5 de 55
5. Pregunta
5. A college marketing department has a networked storage device that uses the IP address 10.18.7.5, TCP port 443 for encryption, and UDP port 4365 for video streaming. The college already uses PAT on the router that connects to the Internet. The router interface has the public IP address of 209.165.200.225/30. The IP NAT pool currently uses the IP addresses ranging from 209.165.200.228-236. Which configuration would the network administrator add to allow this device to be accessed by the marketing personnel from home?
Correcto
Incorrecto
-
Pregunta 6 de 55
6. Pregunta
6. What is a disadvantage of NAT?
Correcto
Incorrecto
-
Pregunta 7 de 55
7. Pregunta
7. Which type of traffic would most likely have problems when passing through a NAT device?
Correcto
Incorrecto
-
Pregunta 8 de 55
8. Pregunta
8. What benefit does NAT64 provide?
Correcto
Incorrecto
-
Pregunta 9 de 55
9. Pregunta
9. Refer to the exhibit. The Gigabit interfaces on both routers have been configured with subinterface numbers that match the VLAN numbers connected to them. PCs on VLAN 10 should be able to print to the P1 printer on VLAN 12. PCs on VLAN 20 should print to the printers on VLAN 22. What interface and in what direction should you place a standard ACL that allows printing to P1 from data VLAN 10, but stops the PCs on VLAN 20 from using the P1 printer? (Choose two.)
Correcto
Incorrecto
-
Pregunta 10 de 55
10. Pregunta
10. Which two packet filters could a network administrator use on an IPv4 extended ACL? (Choose two.)
Correcto
Incorrecto
-
Pregunta 11 de 55
11. Pregunta
11. A network administrator is explaining to a junior colleague the use of the lt and gt keywords when filtering packets using an extended ACL. Where would the lt or gt keywords be used?
Correcto
Incorrecto
-
Pregunta 12 de 55
12. Pregunta
12. Which three values or sets of values are included when creating an extended access control list entry? (Choose three.)
Correcto
Incorrecto
-
Pregunta 13 de 55
13. Pregunta
13. A network administrator is designing an ACL. The networks 192.168.1.0/25, 192.168.0.0/25, 192.168.0.128/25, 192.168.1.128/26, and 192.168.1.192/26 are affected by the ACL. Which wildcard mask, if any, is the most efficient to use when specifying all of these networks in a single ACL permit entry?
Correcto
Incorrecto
-
Pregunta 14 de 55
14. Pregunta
14. The computers used by the network administrators for a school are on the 10.7.0.0/27 network. Which two commands are needed at a minimum to apply an ACL that will ensure that only devices that are used by the network administrators will be allowed Telnet access to the routers? (Choose two.)
Correcto
Incorrecto
-
Pregunta 15 de 55
15. Pregunta
15. A network administrator is adding ACLs to a new IPv6 multirouter environment. Which IPv6 ACE is automatically added implicitly at the end of an ACL so that two adjacent routers can discover each other?
Correcto
Incorrecto
-
Pregunta 16 de 55
16. Pregunta
16. Which statement describes a route that has been learned dynamically?
Correcto
Incorrecto
-
Pregunta 17 de 55
17. Pregunta
17. Refer to the exhibit. How did the router obtain the last route that is shown?
Correcto
Incorrecto
-
Pregunta 18 de 55
18. Pregunta
18. Which statement is correct about IPv6 routing?
Correcto
Incorrecto
-
Pregunta 19 de 55
19. Pregunta
19. Refer to the exhibit. Which type of route is 172.16.0.0/16?
Correcto
Incorrecto
-
Pregunta 20 de 55
20. Pregunta
20. Which two factors are important when deciding which interior gateway routing protocol to use? (Choose two.)
Correcto
Incorrecto
-
Pregunta 21 de 55
21. Pregunta
21. Refer to the exhibit. Which type of IPv6 static route is configured in the exhibit?
Correcto
Incorrecto
-
Pregunta 22 de 55
22. Pregunta
22. A router has used the OSPF protocol to learn a route to the 172.16.32.0/19 network. Which command will implement a backup floating static route to this network?
Correcto
Incorrecto
-
Pregunta 23 de 55
23. Pregunta
23. Which summary IPv6 static route statement can be configured to summarize only the routes to networks 2001:db8:cafe::/58 through 2001:db8:cafe:c0::/58?
Correcto
Incorrecto
-
Pregunta 24 de 55
24. Pregunta
24. Refer to the exhibit. If RIPng is enabled, how many hops away does R1 consider the 2001:0DB8:ACAD:1::/64 network to be?
Correcto
Incorrecto
-
Pregunta 25 de 55
25. Pregunta
25. Which statement is true about the difference between OSPFv2 and OSPFv3?
Correcto
Incorrecto
-
Pregunta 26 de 55
26. Pregunta
26. What happens immediately after two OSPF routers have exchanged hello packets and have formed a neighbor adjacency?
Correcto
Incorrecto
-
Pregunta 27 de 55
27. Pregunta
27. What does the cost of an OSPF link indicate?
Correcto
Incorrecto
-
Pregunta 28 de 55
28. Pregunta
28. Which three pieces of information does a link-state routing protocol use initially as link-state information for locally connected links? (Choose three.)
Correcto
Incorrecto
-
Pregunta 29 de 55
29. Pregunta
29. Which three requirements are necessary for two OSPFv2 routers to form an adjacency? (Choose three.)
Correcto
Incorrecto
-
Pregunta 30 de 55
30. Pregunta
30. A router needs to be configured to route within OSPF area 0. Which two commands are required to accomplish this? (Choose two.)
Correcto
Incorrecto
-
Pregunta 31 de 55
31. Pregunta
31. What are two features of a link-state routing protocol? (Choose two.)
Correcto
Incorrecto
-
Pregunta 32 de 55
32. Pregunta
32. Why would an administrator use a network security auditing tool to flood the switch MAC address table with fictitious MAC addresses?
Correcto
Incorrecto
-
Pregunta 33 de 55
33. Pregunta
33. Two employees in the Sales department work different shifts with their laptop computers and share the same Ethernet port in the office. Which set of commands would allow only these two laptops to use the Ethernet port and create violation log entry without shutting down the port if a violation occurs?
Correcto
Incorrecto
-
Pregunta 34 de 55
34. Pregunta
34. Which problem is evident if the show ip interface command shows that the interface is down and the line protocol is down?
Correcto
Incorrecto
-
Pregunta 35 de 55
35. Pregunta
35. What caused the following error message to appear?01:11:12: %PM-4-ERR_DISABLE: psecure-violation error detected on Fa0/8, putting Fa0/8 in err-disable state
01:11:12: %PORT_SECURITY-2-PSECURE_VIOLATION: Security violation occurred, caused by MAC address 0011.a0d4.12a0 on port FastEthernet0/8.
01:11:13: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/8, changed state to down
01:11:14: %LINK-3-UPDOWN: Interface FastEthernet0/8, changed state to down
Correcto
Incorrecto
-
Pregunta 36 de 55
36. Pregunta
36. While analyzing log files, a network administrator notices reoccurring native VLAN mismatches. What is the effect of these reoccurring errors?
Correcto
Incorrecto
-
Pregunta 37 de 55
37. Pregunta
37. Which three pairs of trunking modes will establish a functional trunk link between two Cisco switches? (Choose three.)
Correcto
Incorrecto
-
Pregunta 38 de 55
38. Pregunta
38. What are two ways of turning off DTP on a trunk link between switches? (Choose two.)
Correcto
Incorrecto
-
Pregunta 39 de 55
39. Pregunta
39. A network administrator is using the router-on-a-stick method to configure inter-VLAN routing. Switch port Gi1/1 is used to connect to the router. Which command should be entered to prepare this port for the task?
Correcto
Incorrecto
-
Pregunta 40 de 55
40. Pregunta
40. Which two characteristics describe the native VLAN? (Choose two.)
Correcto
Incorrecto
-
Pregunta 41 de 55
41. Pregunta
41. On a switch that is configured with multiple VLANs, which command will remove only VLAN 100 from the switch?
Correcto
Incorrecto
-
Pregunta 42 de 55
42. Pregunta
42. What is the purpose of setting the native VLAN separate from data VLANs?
Correcto
Incorrecto
-
Pregunta 43 de 55
43. Pregunta
43. A network contains multiple VLANs spanning multiple switches. What happens when a device in VLAN 20 sends a broadcast Ethernet frame?
Correcto
Incorrecto
-
Pregunta 44 de 55
44. Pregunta
44. Refer to the exhibit. The partial configuration that is shown was used to configure router on a stick for VLANS 10, 30, and 50. However, testing shows that there are some connectivity problems between the VLANs. Which configuration error is causing this problem?
Correcto
Incorrecto
-
Pregunta 45 de 55
45. Pregunta
45. What is the purpose of an access list that is created as part of configuring IP address translation?
Correcto
Incorrecto
-
Pregunta 46 de 55
46. Pregunta
46. Which command will create a static route on R2 in order to reach PC B?
Correcto
Incorrecto
-
Pregunta 47 de 55
47. Pregunta
47. Fill in the blank.
- In IPv6, all routes are level (1) ultimate routes.
Correcto
Incorrecto
-
Pregunta 48 de 55
48. Pregunta
48. Fill in the blank.
- Static routes are configured by the use of the (ip route, IP ROUTER) global configuration command.
Correcto
Incorrecto
-
Pregunta 49 de 55
49. Pregunta
49. Fill in the blank.
- The OSPF Type 1 packet is the (Hello, HELLO) packet.
Correcto
Incorrecto
-
Pregunta 50 de 55
50. Pregunta
50. Fill in the blank.
- The default administrative distance for a static route is (1) .
Correcto
Incorrecto
-
Pregunta 51 de 55
51. Pregunta
51. Match the order in which the link-state routing process occurs on a router. (Not all options are used.)
Ordenar elementos
- step 2
- step 3
- step 1
- step 4
- step 5
-
Each router is responsible for “saying hello” to its neighbors on directly connected networks.
-
Each router builds a Link-State Packet (LSP) containing the state of each directly connected link
-
Each router learns about its own directly connected networks.
-
Each router floods the LSP to all neighbors, who then store all LSPs received in a database
-
Each router uses the database to construct a complete map of the topology and computes the best
Correcto
Incorrecto
-
Pregunta 52 de 55
52. Pregunta
52. Which information does a switch use to populate the MAC address table?
Correcto
Incorrecto
-
Pregunta 53 de 55
53. Pregunta
53. Refer to the exhibit. How many broadcast and collision domains exist in the topology?
Correcto
Incorrecto
-
Pregunta 54 de 55
54. Pregunta
54. What is a function of the distribution layer?
Correcto
Incorrecto
-
Pregunta 55 de 55
55. Pregunta
55. Which switching method drops frames that fail the FCS check?
Correcto
Incorrecto
shh but thanks
Question 11 pts
Which distinct type of VLAN is used by an administrator to access and configure a switch?
management VLAN
admin VLAN
extended VLAN
hopping VLAN
Flag this Question
Question 21 pts
What are the three layers of the switch hierarchical design model? (Choose three.)
data link
distribution
enterprise
network access
access
core
Flag this Question
Question 31 pts
Which cost-effective physical network topology design is recommended when building a three-tier campus network that connects three buildings?
public star
extended star
bus
mesh
Flag this Question
Question 41 pts
Which two characteristics describe a converged network? (Choose two.)
separate wiring infrastructure for voice and video traffic
support of voice and video both using the same switch
affordability for small and medium businesses
decreased service calls
cheaper equipment cost
Flag this Question
Question 51 pts
What would be an ideal environment to carry out penetration tests?
before the network is designed
on a daytime production network
on an off-line test bed network that mimics the actual production network
on actual production network
Flag this Question
Question 61 pts
Which service is provided by an automated attendant feature on a converged network?
video conferencing
IT management interface
point-to-point video
call routing
Flag this Question
Question 71 pts
Which switching mode describes a switch that transfers a frame as soon as the destination MAC address is read?
cut-through
straight-through
fast-forward
cut-forward
Flag this Question
Question 81 pts
Which option correctly describes a switching method?
store-and-forward: ensures that the frame is free of physical and data-link errors
cut-through: provides the flexibility to support any mix of Ethernet speeds
store-and-forward: forwards the frame immediately after examining its destination MAC address
cut-through: makes a forwarding decision after receiving the entire frame
Flag this Question
Question 91 pts
When the appropriate switch form factor for a network is being determined, what type of switch should be selected when future expansion is important and cost is not a limiting factor?
modular switch
layer 3 switch
stackable switch
configured switch
Flag this Question
Question 101 pts
Refer to the exhibit. The PC that is attached to port Fa0/1 is sending a packet that has the destination MAC address of 0050.0fae.299c. Based on the current S1 MAC address table, what will S1 do first when the packet arrives at the switch?
add the MAC address of the PC that is attached to Fa0/1 to the MAC address table
forward the data to S2
broadcast the data to all S1 ports and all S2 ports that have attached end devices
broadcast an ARP request to all S1 ports except port Fa0/1
broadcast the data to all S1 ports that have attached end devices, except the Fa0/1 port
Flag this Question
Question 111 pts
All access ports on a switch are configured with the administrative mode of dynamic auto. An attacker, connected to one of the ports, sends a malicious DTP frame. What is the intent of the attacker?
Brute Force attack
DOS attack
Spanning tree attack
VLAN hopping attack
Flag this Question
Question 122 pts
Refer to the exhibit. A switch receives a Layer 2 frame that contains a source MAC address of 000b.a023.c501 and a destination MAC address of 0050.0fae.75aa. Place the switch steps in the order they occur. (Not all options are used.)
occurs first
occurs second
Flag this Question
Question 131 pts
Which configuration must be in place for the auto-MDIX feature to function on a switch interface?
The speed and duplex of the interface must be configured for full speed and duplex
The vlan interface must be configured in the management vlan
The speed and duplex of the interface must be configured for auto detect
The interface must be configured with an ip address
Flag this Question
Question 141 pts
Which two statements about Layer 2 Ethernet switches are true? (Choose two.)
Layer 2 switches have multiple collision domains.
Layer 2 switches decrease the number of broadcast domains.
Layer 2 switches can send traffic based on the destination MAC address.
Layer 2 switches prevent broadcasts.
Layer 2 switches route traffic between different networks.
Flag this Question
Question 152 pts
Which two characteristics describe a converged network?
accessiblity for small and medium businesses
support of voice and video both using the same switch
affordability for small and medium businesses
support of calls and messaging both using the same switch
Flag this Question
Question 161 pts
When a client is requesting an initial address lease from a DHCP server, why is the DHCPREQUEST message sent as a broadcast?
The DHCP server may be on a different subnet, so the request must be sent as a broadcast.
The client does not yet know the IP address of the DHCP server that sent the offer.
The client may have received offers from multiple servers, and the broadcast serves to implicitly decline those other offers.
The client does not have a MAC address assigned yet, so it cannot send a unicast message at Layer 2.
Flag this Question
Question 171 pts
What is the purpose of the switch command switchport access vlan 99?
to assign the port to management VLAN
to assign the interface to default VLAN
to assign the port to a particular VLAN
to assign the interface to management VLAN
Flag this Question
Question 182 pts
Match the DHCP message types to the order of the DHCPv4 process. (Not all options are used.)
Step 1
Step 2
Step 3
Step 4
Flag this Question
Question 193 pts
What are the three layers of the switch hierarchical design model?
Layer 1 –
Layer 2 –
Layer 3 –
Flag this Question
Question 201 pts
Which command will allow a network administrator to check the IP address that is assigned to a particular MAC address?
Router# show ip dhcp binding
Router# show ip dhcp pool
Router# show running-config I section_dhcp
Router# show ip dhcp server statistics
Flag this Question
Question 211 pts
What is the first action in the boot sequence when a switch is powered on?
login screen
start IOS
check interfaces are working
load a power-on self-test program
Flag this Question
Question 221 pts
What is the most likely scenario in which the WAN interface of a router would be configured as a DHCP client to be assigned a dynamic IP address from an ISP?
The router is also the gateway for a LAN.
There is a web server for public access on the LAN that is attached to the router.
It is a SOHO or home broadband router.
The router is configured as a DHCP server.
Flag this Question
Question 234 pts
What are the 4(four) principals that a Borderless switched network is designed on?
Modularity
Hierarchical
Scalability
Resiliency
Cost Effective
Time-consuming
Flexibility
Flag this Question
Question 241 pts
Fill in the blank. Do not abbreviate.
An administrator is troubleshooting a DHCPv4 issue on a router. By issuing the debug ip dhcp command, the administrator can watch, in real time, the IP address assignments that are performed by the router.
Flag this Question
Question 255 pts
What is the boot sequence in the correct order?
Step 1. [«», «», «», «», «»]
Step 2. [«», «», «», «», «»]
Step 3. [«», «», «», «», «»]
Step 4. [«», «», «», «», «»]
Step 5. [«», «», «», «», «»]
Flag this Question
Question 261 pts
After booting, a client receives an ICMPv6 RA message with the M flag set to 0 and the O flag set to 1. What does this indicate?
The client should be statically configured with an IPv6 address because the local router does not support autoconfiguration.
The client should automatically configure an IPv6 address and then contact a DHCPv6 server for more information.
The client should request an IPv6 address directly from a DHCPv6 server.
The client should automatically configure an IPv6 address without contacting a DHCPv6 server.
Flag this Question
Question 271 pts
What would be the best summary route for the following networks?
10.150.98.0/23
10.150.100.0/23
10.150.102.0/23
10.150.104.0/24
Flag this Question
Question 282 pts
Match the DHCP message types to the order of the stateful DHCPv6 process when a client first connects to an IPv6 network. (Not all options are used.)
Step 1
Step 2
Step 3
Step 4
Flag this Question
Question 2910 pts
What are the following Administrative Distance values?
1. Connected – [«», «»]
2. Static – [«», «»]
3. EIGRP Summary route – [«», «»]
4. External BGP – [«», «»]
5. Internal EIGRP – [«», «»]
6. IGRP – [«», «»]
7. OSPF – [«», «»]
8. IS-IS – [«», «»]
9. External EIGRP – [«», «»]
10. Internal BGP – [«», «»]
Flag this Question
Question 301 pts
In which alternative to DHCPv6 does a router dynamically provide IPv6 configuration information to hosts?
EUI-64
SLAAC
ICMPv6
ARP
Flag this Question
Question 312 pts
Which two statements describe classful IP addresses? (Choose two)
It is possible to determine which class an address belongs to by reading the first bit
The number of bits used to identify the hosts is fixed by the class of the network
Only Class A addresses can be represented by high-order bits 100
All subnets in a network are the same size
Up to 24 bits can make up the host portion of a Class C address.
Flag this Question
Question 321 pts
Refer to the exhibit. A network administrator is configuring a router for DHCPv6 operation. Which conclusion can be drawn based on the commands?
The router is configured for stateful DHCPv6 operation, but the DHCP pool configuration is incomplete.
The router is configured for stateless DHCPv6 operation.
The DHCPv6 server name is ACAD_CLASS.
Clients would configure the interface IDs above 0010.
Flag this Question
Question 333 pts
What are the main components of dynamic routing?
1.
2.
3.
Flag this Question
Question 341 pts
Refer to the exhibit. PC-A is unable to receive an IPv6 address from the stateful DHCPv6 server. What is the problem?
The ipv6 nd managed-config-flag should be applied to interface Gig0/1.
The ipv6 dhcp relay command should be applied to interface Gig0/0.
The ipv6 dhcp relay command should use the link-local address of the DHCP server.
The ipv6 nd managed-config-flag command should be ipv6 nd other-config-flag.
Flag this Question
Question 353 pts
What are the three(3) “Ps” when discussing ACLs?
One ACL per direction
All ACL’s on one interface
One ACL per interface
One ACL per protocol
All ACL’s on a protocol
All ACL’s only in one direction
Flag this Question
Question 361 pts
What is true regarding the differences between NAT and PAT?
PAT uses the word «overload» at the end of the access-list statement to share a single registered address.
PAT uses unique source port numbers to distinguish between translations.
Dynamic NAT allows hosts to receive the same global address each time external access is required.
Static NAT allows an unregistered address to map to multiple registered addresses.
Flag this Question
Question 377 pts
List all the characteristics of a network according to the Routing and Switching curriculum
1.
2.
3.
4.
5.
6.
7.
Flag this Question
Question 381 pts
Which method is used by a PAT-enabled router to send incoming packets to the correct inside hosts?
It uses a combination of the source TCP or UDP port number and the destination IP address on the incoming packet.
It uses the source TCP or UDP port number on the incoming packet.
It uses the source IP address on the incoming packet.
It uses the destination TCP or UDP port number on the incoming packet.
Flag this Question
Question 394 pts
List all the information your network documentation should contain
1. [«», «», «», «»]
2. [«», «», «», «»]
3. [«», «», «», «»]
4. [«», «», «», «»]
Flag this Question
Question 401 pts
What are two benefits of NAT? (Choose two.)
It makes troubleshooting routing issues easier.
It saves public IP addresses.
It adds a degree of privacy and security to a network.
It makes tunneling with IPsec less complicated.
It increases routing performance.
Flag this Question
Question 416 pts
List whether or not the following are advantages or disadvantages.
1. Configuration complexity increase with network size. [«», «»]
2. No extra resources (CPU, bandwidth etc.) needed. [«», «»]
3. Topology changes will affect configuration. [«», «»]
4. Route path to destination is always the same. [«», «»]
5. Routing tables are small and maintenance is minimal. [«», «»]
6. No automatic updates will be made to the routing table if topology changes. [«», «»]
Flag this Question
Question 421 pts
Refer to the exhibit. Which address or addresses represent the inside global address?
192.168.0.100
any address in the 10.1.1.0 network
209.165.20.25
10.1.1.2
Flag this Question
Question 435 pts
Explain the following:
Hello Packets
Database Description(DBD)
Link-State Requests(LSR)
Link-State Update(LSU)
Link-State Acknowledgement(LSAck)
Flag this Question
Question 441 pts
Refer to the exhibit. Router R1 is configured with static NAT. Addressing on the router and the web server are correctly configured, but there is no connectivity between the web server and users on the Internet. What is a possible reason for this lack of connectivity?
The inside global address is incorrect.
The router NAT configuration has an incorrect inside local address.
Interface Fa0/0 should be configured with the command ip nat outside.
The NAT configuration on interface S0/0/1 is incorrect.
Flag this Question
Question 451 pts
Refer to the exhibit. A technician is configuring R2 for static NAT to allow the client to access the web server. What is a possible reason that the client PC cannot access the web server?
The IP NAT statement is incorrect.
Interface S0/0/0 should be identified as the outside NAT interface.
The configuration is missing a valid access control list.
Interface Fa0/1 should be identified as the outside NAT interface.
Flag this Question
Question 462 pts
Refer to the exhibit. Router R2 is configured with static NAT. Place in order the steps that occur when the client accesses the web server through the router. (Not all options are used.)
Step 1
Step 2
Step 3
Step 4
Step 5
Flag this Question
Question 471 pts
How many addresses will be available for dynamic NAT translation when a router is configured with the following commands?
Router(config)#ip nat pool TAME 209.165.201.23 209.165.201.30 netmask 255.255.255.224
Router(config)#ip nat inside source list 9 pool TAME
31
10
7
8
24
9
Flag this Question
Question 481 pts
What does VLSM allow a network administrator to do?
All subnets in a network are the same size.
different subnet masks in the same destination IP address
utilize multiple different subnet masks in the same IP address space
Routers use subnetting tables to determine the best path to send packets.
Flag this Question
Question 491 pts
Refer to the exhibit. Router R1 is configured for PAT. What is a possible reason that the addresses in the network are not translated?
Access-list 1 is misconfigured.
Interface S0/0/0 should be identified as the inside NAT interface.
Interface Fa0/1 should be identified as the outside NAT interface.
NAT-POOL2 has not been bound to the ACL.
Flag this Question
Question 505 pts
Match the correct definitions for the following commands for configuring Port Security Sticky
interface fa 0/5
switchport mode access
switchport port-security
switchport port-security maximum 5
switchport port-security mac-address sticky
Flag this Question
Question 511 pts
A network administrator wants to examine the active NAT translations on a border router. Which command would perform the task?
Router# debug ip nat translations
Router# show ip nat statistics
Router# clear ip nat translations
Router# show ip nat translations
Flag this Question
Question 526 pts
Fill in the commands used to configure Auto-MDIX Feature With Duplex and speed on Interface Fastethernet 0/2
(in the correct order and save the configuration)
(use lower case for all configurations Except passwords where needed)
(Only type the command – Nothing before the ‘#’ needed)
Flag this Question
Question 531 pts
What is the purpose of entering the command ip nat inside source static tcp 192.168.10.2 80 209.165.200.223 8080 at the global configuration prompt?
It binds the inside local address and local port to the specified inside global address and global port.
It identifies the inside NAT interface on the router.
It enables a one to one translation between different internal port numbers.
It prevents the router from establishing a connection with any device that does not have the specified address and port number.
Flag this Question
Question 545 pts
Fill-in the following commands
(use lower case for all configurations Except passwords where needed)
(Only type the command – Nothing before the ‘#’ needed)
1. Display interface status and configuration
2. Display current start-up configuration
3. Display Flash file system
4. Display MAC address table
5. Verify Port Security
Flag this Question
Question 5510 pts
Complete a basic configuration
(use lower case for all configurations Except passwords where needed)
(Only type the command – Nothing before the ‘#’ needed)
1. Enter the Router
2.Enter global config maode
3. Configure the console port and include the password ‘Cisco’
4. Configure the vty port and include the password ‘Cisco’
5. Configure the Banner – ‘No Unauthorised Users Allowed’
6. Configure the Hostname ‘Comnet2016’
Aiman
PLZ check question 5
even if you select the right answer, it mark it as wrong answer
Andrés
Saludos desde perú.
¿Porque las respuestas de algunas preguntas no coinciden con las respuestas de su examen resuelto?
Marty
Hey Guys,
question 5 has got a bug, the correct answer is here wrong.
Question is also wrong, you can not choose two answers.
Thank you
Marty
And Question 20
Marty
Hey Guys,
in question 5 is a bug. If you check the right answer you will get a error.
Question 20 is also wrong, you can only check one box, but you have to check two boxes.
Thank you
ss
s
Ant
Question 10 answer is not ICMP because ICMP is for IPV6.
ANswers are: destinaition MAC address and destination UDP port number
sidali
dans la question 20 a la place de mettre des checkbox vous avez mis des radiobox
merci de corriger